(2)
Cable Requirements
24 AWG min, multi‐conductor stranded with an overall foil shield
(3)
Wiegand Outputs
Wiegand (industry standard 26-bit Wiegand and custom Wiegand formats)
(4)
Card Technology Supported
Long Range Identification Transmitters (WAC-HIT-WT2/4)
(5)
Power
Reader can be powered by the access panel.
(6)
Powering up Reader
1.
When Reader is powered up reader will beep 4 times and stable orange light will turn on
2.
Press button on transmitter to see the card event and to register the remote into the server
(7)
Troubleshooting
If the long range reader does not recognized on does not display the card event
Possible causes
Solutions
Incorrect cabling
Verify wiring, see (2) for proper wiring
Reader did not beep remote button is pressed
Verify if transmitter technology is supported
Reader did not show any card events when pressing
button 1 and 2
Make sure the reader is programmed into buttons 1/2,
see manual for more details
Note: if any solutions above did not work please contact Watch
NET
Access Technical Support phone number
+1-866-843-6865 or visit our website @ www.watchnetaccess.com
All Logos & trade marks represent the registered users only. All rights reserved.
All product specifications on this brochure are subject to change without notice.
Division of Watch
NET
Inc.
Canada:
351 Ferrier Street Unit 5
Markham, Ontario L3R 5Z2
Tel: 416-410-6865
Toll Free: 1-866-843-6865
Fax: 1-866-331-3341
USA:
171 Cooper Ave. Suite 110
Tonawanda, NY 14150 USA
1-716-877-7277
Toll Free: 1-855-404-3193
Fax: 1-866-331-3341
UAE:
PO Box No 126312
Office Suite 703
Oxford Towers
Business Bay, Dubai, UAE
Tel: + 971 4 2767117
India:
RZ- 2, Ground Floor
Kapashera
Opp Kapashera Police Station
New Delhi-110037
Tel/Fax: +91 11 26816005
www.watchnetaccess.com
