QUICK CONNECTION GUIDE
Connecting Your ENS-08 POE
Package Contents:
LAN / WAN
Free DDNS
www.dvrid.com
NVR (X1) Cameras (X4 or x8) Remote Control (x1) Software CD (X1) Mouse (X1) Power Adaptor (X2) Ethernet Cable (X1) Power Cable (X2)
PoE
48 Volts Power
12 Volts Power
Router*
Microphone*
Speaker*
Smart Phone*
720P/1080P VGA*
Simultaneous Display
IE / Client for Windows or MAC Client for OSX
PoE IP Cameras
Power
ON/OFF
USB Mouse
Watch
NET
Products are subject to continuous changes and
improvements, information on this document is subjected to
change without prior notice.
2015 Watch
NET
Inc. © All Rights Reserved
Quick Start Guide (X2) Mouse Pad (X1)
110V AC / 240V AC
720P/1080P HDMI*
Simultaneous Display
LAN
Typical 16 Camera connection
with built-in 8 Port POE NVR & 16 Port Switch
ENS 16 POE*
POE Cameras
Strobe lamp*
NOTE:
1. External 12 or 16 Port POE Switch is needed to connect the additional 8 cameras.
(If using regular switch, the cameras must have 12V 1Amp Power Source connected)
2. Launch the Config tool from the software CD and assign IP Address to cameras to suite the
local LAN configuration.
3. Please see hardware manual on the software CD for more instructions.
NOTE:
Cameras included only
in KIT Models and may vary from
KIT Model numbers
* Not included/sold separately.
