8
Step 2
First prepare the cable according to the cable. Line up the three screw holes at the bottom of the bracket
to the three installation holes in the wall or the ceiling, and then insert three screws to the three holes of
the chassis of the bracket and fix them firmly. Now secure the bracket on the installation surface of the
wall or the ceiling.
Step 3
Adjust the camera to the proper monitor area via the three directions indicated in Figure 3-5 after you fixed
the camera.
Figure 3-5
Step 4
Connect the device video output port to the terminal devices such as the DVR, NVS and etc. Then connect
the power cable to the device.
Now you have completed the device installation and cable connection.
You can use the terminal encode devices to view the monitor video.
