Watchguard XTM 3 Series, Hardware Manual

Page: 7 / 26

Hardware Guide 5
Hardware Specifications
Dual USB interface
Connect a USB storage device to use for USB backup and restore, or to store a support snapshot.
For more information about USB functions, see the Fireware XTM WatchGuard System Manager Help
or Fireware XTM Web UI Help .
Network Interfaces
The interfaces have standard RJ45 connectors and are labeled 0,1,2,3,4,5,6. All interfaces support link
speeds of 10, 100, or 1000 Mbps.
Indicators for network interfaces
At the top of each labeled network interface, there is a pair of indicators. The indicator at the left of
the interface is the activity indicator for that interface. The indicator at the right shows the connection
speed for that interface.
Rear View
The AC receptacle, fan, and power switch are on the rear of the device.
AC receptacle
Accepts a detachable AC power cord supplied with the device. The power supply for the device is a
WatchGuard standard auto-sensing AC power supply.
Fan
The fan decreases the internal temperature of the device.
Power switch
Controls the power supplied to the device.
Caution
You must disconnect the power supply before you remove the cover of the XTM 3 Series
device. If you open the cover without prior authorization from WatchGuard, this voids the
Hardware Warranty.
Indicator Indicator color Interface Status
Activity (upper left) Yellow Power on, connection established
Not lit Power off, no connections
Blinks
(speed of blink increases as the
data flow increases) Data sent and received
Connection Speed
(upper right) Not lit Link speed: 10 Mbps
Green Link speed: 100 Mbps
Yellow Link speed: 1000 Mbps