Watchguard WGSMSB, User Manual

Page: 10 / 12

Page 10 of 12 Ver 1.0
9. The SMS Commands.
Notice:
1) All the letters in SMS commands and PC Configurator must be CAPITALIZED under the English format.
2) It makes no difference for adding country code or not in front of the mobile phone numbers.
3) The Examples in the charts below are only for reference, please send the SMS commands according to your actual situations.
1
）
when the wrong SMS commands was send:
SMS Commands Return SMS Message
SMS Format Error, Please check Caps Lock in Command!
Notice: Any SMS commands with wrong format was send, you will receive a SMS notification.
2
）
When the external DC Power loss/Recovery
Return SMS Message
DC Loss External DC Power Goes OFF
DC Recovery External DC Power Goes ON
3
）
Change the password (The default password is 1234, with 4 digits):
SMS Commands Return SMS Message
Old Password
＋
P
＋
New Password
【
New Password
】
,This is the New Password, please remember it carefully.
For Examples: 1234 P 4321
【
4321
】
,This is the New Password, please remember it carefully.
Notice: When the password was forgot, please reset the device from the PC configurator.
4
）
Inquiry the device information remotely
SMS Commands Return SMS Message
P EE
Model:
Version:
IMEI:
GSM Signal Value:
For Examples: 1234 P 4321
Model:
K5T
Version: V 1.00 2015-12
IMEI: 867965029050313
GSM Signal Value: 30
Notice:
1)
Every
WGSMSB
has a unique IMEI code for firmware upgrading.
2)
The GSM Signal Value range: 1~31, Signal weak value: >14.
5)
Program the 5 mobile phone numbers (the max is 23 digits) for SMS notification.
Actions SMS Commands Return SMS Message
Set Mobile Phone Numbers
P A +Serial T + Phone Number
For Example: 1234 A 3 T 13570810254
Tel1: ---
Tel2: ---
Tel 3 : 13570810254
Tel4: ---
Tel5: ---