background image

Specifications

Dimensions

300 x 220 x 65mm

Weight

1kg

Power Consumption

30mA @ 12VDC

Voltage Range

9~15VDC

Backup Battery

7.2V 500mA rechargeable

Siren Current

200mA @ 12VDC

Siren Volume

105±3dB at 1m

Flash Speed

60/min

Flash Current

120mA @ 12VDC

Wireless Signal

315MHz / 433MHz / 868MHz

Timers

5sec. (Test) / 3min. / 20min.

Lifetime

Siren - 8hr usage / Flash: 24hr usage

Operating Environment

-20° to 60°C

Material

Polycarbonate

Case Protection

UV, corrosion & water protection

Wireless Range

The transmitter has a wireless range of approximately 100m. This can vary depending on 
walls or obstacles between the transmitter and the siren.

~100m

Summary of Contents for WGSIR-500W

Page 1: ...with high visibility strobe flashes Dual tamper switch protection for outer casing wall mount removal Internal 7 2V rechargeable backup battery This wireless outdoor siren is a cost effective outdoor sounder It features a waterproof UV resistant anti corrosive design with low battery consumption With the NimH battery it can last up to 3 days with AC power cut off ...

Page 2: ...ed 60 min Flash Current 120mA 12VDC Wireless Signal 315MHz 433MHz 868MHz Timers 5sec Test 3min 20min Lifetime Siren 8hr usage Flash 24hr usage Operating Environment 20 to 60 C Material Polycarbonate Case Protection UV corrosion water protection Wireless Range The transmitter has a wireless range of approximately 100m This can vary depending on walls or obstacles between the transmitter and the sir...

Page 3: ...r the transmitter with the 12VDC 500mA pack included The siren will learn the transmitter indicated by LED2 turning ON and LED1 turning OFF 6 Remove the power pack the siren will sound for few seconds indicating the transmitter has been coded to the siren unit 7 Remove the transmitter and connect it to the siren port or pulse trigger output on the Alarm Control Panel 8 Make sure the 12V power pack...

Page 4: ...le shows what to set the DIP switches to for the desired siren duration Refer to the table below for a more detailed description 2 The 2 pin DIP switch bottom circle has two switches 1 A and 2 B ON 1 OFF 0 Siren Duration DIP Switch 1 A DIP Switch 2 B 15 Minutes 0 0 3 Minutes 0 1 1 Minute 1 0 Continuous 1 1 ...

Reviews: