background image

Using the VISTA Vehicle Kit

Configuring the auto-start record settings for the VISTA Vehicle Kit, see your agency's Evidence
Library software documentation.

Auto-start recording delay

When your agency configures the auto-start record inputs for the VISTA Vehicle Kit, it can set
up a record-start delay to use with one or more of the inputs. The delay can be 3, 5, or 10
seconds.

Note:

The amount of time set for a record-start delay applies to all the inputs

that use a delay. One amount of time cannot be set for one record-start input
and another amount of time for another input.

When an input that has a delay applied is activated, the VISTA WiFi or VISTA XLT camera delays
the start of a recorded event by the set amount of time. As soon as the input activates, the
camera starts counting down the set delay time. Once the delay time has passed, if the input is
still active, the camera starts recording the event.

For example, your agency has the emergency siren set up as an auto-start record input with a
5 second delay. What happens when you:

l

Turn on the siren then immediately turn it off?

VISTA WiFi or VISTA XLT does NOT automatically start recording an event because the
activation/deactivation occurred within the 5 second delay period.

l

Turn on the siren and leave it on?

Once 5 seconds have passed (the delay period), the camera automatically starts recording an
event.

Warning!

Typically, VISTA WiFi and VISTA XLT do NOT record video or

audio during the delay period. For more information, see Video and audio
during the delay period below.

Video and audio during the delay period

VISTA WiFi and VISTA XLT do NOT record video

during the delay period for an auto-start

record input UNLESS the agency has enabled pre-event and/or Record-After-the-Fact® (RATF)
on the camera.

VISTA WiFi and VISTA XLT do NOT record audio

during the delay period UNLESS the

agency has enabled pre-event and/or RATF AND has chosen to force the camerai's microphone
on all the time.

For information about pre-event, RATF, and forcing the camera's microphone on, see the

VISTA

HD Wearable Camera User Guide

.

26

VISTA Vehicle Kit

WGD00161 Revision A

Summary of Contents for VISTA XLT

































Reviews: