Watchguard Firebox X1000, Hardware Manual, Page: 15 / 18

Hardware Description
Hardware Guide 5
The photograph below shows a close-up of the left side of the
indicator panel. From the left, the indicators are as follows:
Front Panel Display
The LCD screen displays Firebox X status information.
Use the buttons to change the information that
appears.
LCD Console Buttons
Use the buttons to scroll through the following
information:
If you press and hold the Up button within ten seconds
after powering on, the Firebox X boots into SysB mode.
Power
A yellow LED (light-emitting diode) indicates that the
power is on.
Arm/Disarm
A green LED indicates the Firebox is armed. A red LED
indicates the Firebox is disarmed.
Serial port (Console)
An DB9 connector for the serial port. This port has a
cover that you need to remove to access the port.
Up Firebox Model Number
Sys A or Sys B status
Armed or Disarmed status
Right Load average
Memory usage
Down Firebox uptime
Time of last change to
configuration file
Left External IP address
Default Gateway