![background image](http://html.mh-extra.com/html/watchguard/firebox-vclass-v100/firebox-vclass-v100_administration-manual_874132019.webp)
Administrator Guide
17
Configuring WINS and DNS Servers
2
From the
Type
drop-down list, select
ESP
or
AH
as the proposal method. Only ESP is supported
at this time.
3
From the
Authentication
drop-down list, select
SHA1
or
MD5
for the authentication method.
4
From the
Encryption
drop-down list, select the encryption method.
The options are None, DES, 3DES, and AES 128, 192, or 256 bit, which appear in the list from the
most simple and least secure to most complex and most secure.
5
To make the gateway endpoints generate and exchange new keys after a quantity of time or
amount of traffic passes, select the
Force Key Expiration
check box. In the fields below, enter a
quantity of time and a number of bytes after which the key expires.
If
Force Key Expiration
is disabled, or if it is enabled and both the time and kBytes are set to zero,
the Firebox tries to use the key expiration time set for the peer. If this is also disabled or zero, the
Firebox uses a key expiration time of 8 hours.
You can set the time up to one year.
6
Click
OK
.
Allowing Internet access through Mobile VPN tunnels
You can give remote users access to the Internet through a Mobile VPN tunnel when you use the
MUVPN wizard and select the
Yes, force all Internet traffic to flow through the tunnel
radio button
on the “Direct the flow of Internet traffic” screen.
This option adds Any-External as an allowed resource, which means that traffic destined to go out any
external interface is allowed.
Configuring WINS and DNS Servers
RUVPN and Mobile VPN clients rely on shared Windows Internet Name Server (WINS) and Domain
Name System (DNS) server addresses. DNS translates host names into IP addresses. WINS resolves
NetBIOS names to IP addresses. These servers must be accessible from the Firebox® trusted interface.
Make sure you use only an internal DNS server. Do not use external DNS servers.
1
From Policy Manager, select
Network > Configuration
. Click the
WINS/DNS
tab.
The information for the WINS and DNS servers appears.
2
Type a domain name for the DNS server.
3
In the
DNS Servers
and
WINS Servers
text boxes, type the addresses for the WINS and DNS
servers.