4
WatchGuard Firebox M370/470/570/670
Hardware Specifications
Hardware Description
Front View
Front view of the Firebox M670:
Left front:
Buttons and Indicators
Power (
)
The power indicator on the left front of the device is green when the device is powered on.
Arm/Disarm (
)
When the device is armed and ready to pass traffic, this indicator is green. When the device is
powered on, but not ready to pass traffic, this indicator is red.
Storage (
)
When there is activity on the mSATA card or hard disk this indicator is yellow.
Power Button (
)
The Power button, on the front of the Firebox, is lit to indicate power status. It is green when the
Firebox is powered on, and red when power is available, but the Firebox is powered off. When the
Power button is red, press this button to power on the device. When the Power button is green, press
and hold the power button for five seconds to power off the device. The Firebox does not power off
if you briefly press the power button.
Reset Button
The Reset button, located to the right of the power button, resets the device to factory-default
settings. To reset the device, use the procedure in “Restore Factory-Default Settings” on page 9.
