Watchguard DV-1 guide, User Manual

Page: 78 / 142

SUPERVISOR AND ADMINISTRATOR LOGIN SUPERVISOR/ADMINISTRATOR FUNCTIONS
78
If you have not previously logged in as Supervisor, or if you have
exited the
Main Menu after being logged in as Supervisor, the
system asks for a Supervisor PIN number when accessing the
Supervisor Menu.
Press
MENU
>
SUPERVISOR MENU
.
Press the

and

keys to navigate to the correct number, and then
press
Enter
to select each number. If you enter an incorrect
number,
Invalid PIN
is displayed and you must start over again.
Press
Cancel
before the fifth number is entered to exit without
logging in. The
Login
key is automatically pressed when the fifth
number is selected.
The SUPERVISOR MENU is displayed.
System behavior settings control when the DV-1 system powers on
or off based on vehicle on or off status.
Press
MENU
>
SUPERVISOR MENU
>
Set System
Behavior
.
If prompted to login, follow the steps listed in Supervisor and
Administrator Login on page 78.