Watchguard CVR8COM, Quick Start Manual, Page: 16 / 20

Watchguard Surveillance Quick Start Guide - Version: WGDVR-Q119
16
6.2 Tripwire & IVS Setup
Fig. 6.2:
Face Detection Smart Search.
6.1.3 Smart Search (Face Detect)
1. From the Main Menu, select
Face Detect.
The Smart
Search tab will be selected by default.
2. From here, you can search through every face
detection event in a certain period of time. Test this
by setting a
Begin TIme
and
End Time
, then clicking
Search
.
3. If any faces were detected in the specified timeframe,
they will be displayed along with a timestamp.
Double-click on one of the faces to see the full
snapshot.
4. If a Post Record time has been set (see 6.1.2 Face
Detection Settings), you can also play a video
snippet of the time the face was detected by
pressing the Play button at the bottom left.
6.2.1 Tripwire Setup
1. From the Main Menu, select IVS .
2. Select the Channel you want to set up for.
3. Press the Add button at the bottom right. This will
create a new IVS setting (Tripwire by default).
4. Click the
Draw button
to bring up the Draw
screen (Fig. 6.3).
5. Left-click
on the screen to start drawing the Tripwire
line.
Left-click again
to finish the line (optionally, you
can add additional corners to the line by continuing
to left-click).
Right-click
to finish placing the line.
6. In the top left window, you can alter the Direction
that the line must be passed from to activate the
event, as indicated by the arrow going across the
line (A to B, B to A, or both ways).
7. Click OK to finish.
8. Click the Trigger Button to bring up the Trigger
menu, configuring what actions are taken once the
IVS event is triggered. These configuration options
are identical to the ones shown in 6.1.2 Face
Detection Trigger.
9. Click OK to finish.
10. Click the
Enable box
to turn on the IVS rule.
11. Click Apply to save changes.
6.2.2 Intrusion/Abandoned/Missing Setup
Intrusion, Abandoned Object and Missing Object are all
set up in similar ways to Tripwire - simply select which
IVS you want to set up from
Type menu
(Fig. 6.4).
Fig. 6.4:
IVS setup screen.
Fig. 6.3: Tripwire Draw screen.