Base Unit Features
Red and Green Status LEDs
Please reference Figure 2.
The green LED on the Base will light when communicating with the
Transmitter device. The LED will light solid green when a voice recording
is enabled. During a voice recording, this LED will flash when the
Transmitter is muted. When a recording is not active, this LED will flash
when the Base is attempting to associate (bind) with a Transmitter device.
The red LED on the Base will light when the transmitter is inserted into
the base. The LED will light red when the battery is charging. The green
LED will light when the battery is fully charged.
Figure 2: Base Front
Binding a Base with a Transmitter
To function correctly, a specific Transmitter device must be bound or
associated with a specific Base. This is the process that allows the Base
and Transmitter to communicate wirelessly without interfering with other
Base/Transmitter pairs.
To bind a Transmitter to a Base, ensure the Base device is properly
installed in a vehicle as describe above. Power-on the DVR to apply
power to the Base. Insert the Transmitter device into the Base cradle fully
- 8 -
WGD00091
Revision A