Surge Counter & Smart Detector
.
Setting Steps
1. When ALARM indicator flashes frequently, short press RESET, switch to NO/NC, default: 0 (NO: normal, NC: fault)
2. When Modbus indicator flashes frequently, short press RESET to set RS485 ID address (RS485 ID: 1-247)
3. When POWER indicator flashes frequently. Short press RESET to save data and return to the Standby mode. (Data can
also be saved automatically after 30 seconds and return to Standby mode without pressing RESET in any setting status)
Cloud Service Mode: Device ID, Surge Counts
When the power is turned on, the LCD screen displays in sequence: the first screen displays 2 digits or letters, the second
screen displays 3 digits or letters, and the third bottle displays 3 digits or letters, and the device number consisting of 8
numbers or letters in total ( Take the device number 2010CAFE as an example: the first screen displays 20, the second
screen displays 10C, and the third screen displays AFE)
After the three screens are displayed, the last display is the number of surges, and the screen keeps displaying this value.
(Each product has a unique Device ID, which is fixed in the product when it leaves the factory. This device number is only
used for Cloud service functions)
