manualshive.com logo in svg

WatchfulEye US128002, Manual

Share
Download
WatchfulEye US128002 Manual Download Page 15

Portable  Surge  Protective  Device  Tester

Ⅵ

II. Calibration Steps of the Tester

Opened the back cover of the tester with a screwdriver, find the potentiometer R3, R14, R17 and R4 in corresponding to
the calibration functions.
Step 1. Calibrate the constant current of 1mA
Choose FUNCTION 2 to calibrate the stability of 1mA current(at current mode of a mutimeter)
Step 2. Calibrate the break-over voltage with R3
Choose FUNCTION 2 to calibrate the break-over voltage of MOV(at voltage mode of a mutimeter)
Step 3. Calibrate 75% of the break–over voltage with R14
Choose FUNCTION 2 to calibrate the 75% of break-over voltage(at voltage mode of a mutimeter)
Step 4. Calibrate the leakage current with R17
Choose FUNCTION 3 to calibrate the leakage current of MOV under 75% of break-over voltage (at voltage mode of a
mutimeter)
Step 5. Calibrate the breakdown voltage with R4
Choose FUNCTION 7 to calibrate the breakdown voltage of GDT(at voltage mode of a mutimeter)

Note:

 R3, R14, R17 and R4 indicate potentiometers

(Open the back cover of an SPD tester with a screwdriver, the blue components in the following picture refer to
potentiometers R3, R14, R17 and R4)

www.watchfuleyesolutions.com - Page 15 - Back to MENU -

Summary of Contents for US128002




















Reviews:

No comments

Brands by name

Popular brands

Load more brands