4
Thank you for purchasing a Watchdog Plant Growth Pup Station for
use in a Retriever & Pup Wireless Sensor Network. This manual de-
scribes the setup and use of the station
The Sensor Pup component of the Station has been pre-configured to
use the Temperature/RH and PAR light sensors. Ports C and D are
available for sensors of your choice.
The Pup transmits sensor data to the Retriever either directly or via a
Repeater Pup. For details on how to configure the Sensor Pup Sta-
tion into the network, refer to the “
Retriever and Pup Wireless Network
Product Manual”
.
Introduction
Package Contents
•
Bagged items:
* 6 AA alkaline batteries
* Antenna with stabilizer
* 2 sets of U-bolt and clamp
* 2 0.35" (0.9cm) screws
•
Temperature/RH sensor assembly (includes aspirated radiation
shield, bracket, and solar panel)
•
PAR Light sensor
•
Manuals
