Graphical Digital Panel Meter WPMZ-3 INSTRUCTION MANUAL
65
IM-0883-01
Ach Scale
Set upper limit and lower limit in Trend Display of Ach.
*This is not scaling for display value of Ach, but only set limits of values in level display.
Operation:[MENU]
⇒
[Display]
⇒
[TrendDisp]
⇒
[Ach Scale]
Setting value: Lower limit: ±99999 (Initial value is 0)
Upper limit: ±99999 (Initial value is 10000)
Bch Scale
Set upper limit and lower limit in Trend Display of Bch.
*This is not scaling for display value of Bch, but only set limits of values in level display.
Operation:[MENU]
⇒
[Display]
⇒
[TrendDisp]
⇒
[Bch Scale]
Setting value: Lower limit: ±99999 (Initial value is 0)
Upper limit: ±99999 (Initial value is 10000)
CalcScale
Set upper limit and lower limit in Trend Display of calc value.
*This is not scaling for display value of calc value, but only set limits of values in level display.
Operation:[MENU]
⇒
[Display]
⇒
[TrendlDisp]
⇒
[CalcScale]
Setting value: Lower limit: ±99999 (Initial value is 0)
Upper limit: ±99999 (Initial value is 10000)
ALSelect
Set alarms(AL1
～
4) that should be display in Trend display.
Operation:[MENU]
⇒
[Display]
⇒
[TrendDisp]
⇒
[ALSelect]
Setting value:
AL1 ON/OFF (Initial state is ON)
AL2 ON/OFF (Initial state is ON)
AL3 ON/OFF (Initial state is ON)
AL4 ON/OFF (Initial state is ON)
TimeAxis
Set time axis of trend display.
Operation:[MENU]
⇒
[Display]
⇒
[TrendDisp]
⇒
[TimeAxis]
Setting value:
100ms/div,1s/div (Initial state),2s/div,5s/div,10s/div,30s/div,60s/div,120s/div
*When you change time scale, past gragh is erased.
