Page 5
Page 6
1. Connect the green and yellow wire from the floodlight to the existing ground
wire inside the junction box. Use the included wire nut to connect the wires
properly.
2. Using a wire nut, connect the white neutral wire from the floodlight to the
neutral wire of the junction box.
3. Using a wire nut, connect the black hot wire from the floodlight to the hot
wire of the junction box.
The white wire on your floodlight is a neutral wire.
The black wire on your floodlight is a hot wire.
Wiring the Floodlight and Junction Box through
the EVA Gasket
Neutral Wire (White)
Hot Wire (Black)
Ground Wire (Copper)
Junction Box
Wire Nuts
Important:
Before mounting the floodlight, completely apply the EVA gasket around
the perimeter of the cover plate where the back of the cover plate meets
the mounting surface. This prevents water from seeping into the junction
box.
4. Make sure that the wire connections are secured. Carefully place the
wires into the junction box.
6. Switch on the electricity, checking that the wiring has been done correctly
and that the floodlight illuminates.
5. Mount the floodlight onto the crossbar and secure it with the screw cap
provided.
