background image

Mini Sewing Machine for

Beginners and Kids 

Compact and lightweight machine that makes

 sewing convenient and fun!

Package Includes

1 x Sewing Machine
4 x Bobbins
1 x Needle
1 x Threader 
1 x Foot Pedal
1 x AC/DC Adaptor 
1 x User Manual

Safety Information

AC Adapter

Foot Pedal

Needle

Threader

Thread Spools

Metal Bobbins

• 

Always disconnect or remove the power supply (including 

 

batteries) when changing needles or threading.

• 

Please keep the machine out of reach of children.

 

If children use it, ensure adults' supervision is present.

• 

Never leave the sewing machine unattended while

 

plugged in. Turn the switch off and unplug the cord when 

 

not in use. 

• 

Never open the main motor case of the machine. The

 

mechanism has been factory adjusted.  

• 

When operating the sewing machine, keep your hands 

 

away from the needle, hand wheel, upper thread tension 

 

dial, and pattern selection dial.

• 

To clean the sewing machine, wipe it with a soft cloth and 

 

never use any harsh chemical solutions.

• 

This sewing machine is an electrical appliance when used 

 

with the adapter. Do not submerge the unit or any other 

 

parts in water. Do not operate the sewing machine with 

 

wet hands, without shoes, or while standing in water, or 

 

on a moist surface. 

• 

Never use the machine with a damaged power cord or 

 

plug, and keep the power cord away from heated surfaces. 

• 

Do not unplug by pulling or tugging the cord. Hold the

 

plug with dry hands to remove it from the outlet. 

Summary of Contents for DARTWOOD Mini Sewing Machine for Beginners and...










Reviews: