Combination
Smoke and Carbon
Monoxide Alarm
USER MANUAL
In the Box
Specifications
How to Setup
Introduction to Parts
smoke detector
wifi base
2 x wall anchors
red indicator/
control button
connection
pogo pins
2 x screw
page 1
page 2
page 3
screw holes
metal sheet
Alarm Module
Working Voltage
Standby current
Alarm current
Low voltage threshold
DC 3V battery (non replaceable)
<12uA
<35mA
2.7V
Wifi Module
Working Voltage
Low voltage threshold
Lifespan
Alarm mode
Size
Fire protection grade
DC 6V battery (replaceble)
5.2V
>5 years
LED & buzzer & APP alarm
4.8 x 0.8 in
V-0
Frequency range:
Antenna gain:
Max. Radio
Transmission Power:
2412-2472MHz
2.5dB
13dB
1. Download “Wasserstein” App by scanning the QR
code or download from Google play store,
connected with your phone with 2.4GHz Wi-Fi
network.
3. Open the App. To add this device press the "+" on
top right corner and choose "Alarm (WiFi)".
4. Write down your network name and password.
Note: This device only works on a 2.4Ghz Wi-Fi
network, not on a 5Ghz Wi-Fi network. You should
change the Wi-Fi frequency of your network to
2.4Ghz network in the setting menu of your router.
2. Remove the insulation sheets found at both
batteries. The red indicator on the button will flash
twice. If it is not removed, the detector will sound
to alert that no battery is detected.
This product is intended for separate collection at a designated
collection point. Do not dispose of the product with the household
waste. For further information, please contact your local authorities.
Dispose of empty batteries in a designated battery recycling bin.
