Page 7
Figure 1
Flash
Dim
Flash
Dim
Add Manually
1. Select "Lighting" - "PIR Light
（
BLE+Wi-Fi)".
2. Reset the floodlight by turning it on and off in the following sequence:
on-off-on-off-on (steps also displayed in your App). Then, your floodlight
will flash in intervals (Figure 1).
selection
If the light is flashing already,
please skip the reset steps.
Resetting the device:
1. Power on the device.
2. Turn on-off-on-off-on.
3. Make sure the light is flashing.
Note: Please complete the network
selection within 3 minutes after
resetting the device.
Confirm that the light is flashing.
