Wassermann SG-1, User Manual, Page: 7 / 16

6.2 Installation
Open the box, remove the packing materials, and carefully lift out the device and
accessories. Check the included accessories.
The device has to stand horizontally on a steady and even surface.
Install the device in a place where it will not block the working area and the
functionality (take the dimensions into account). Make sure that there are about
10 cm of free space on each side to guarantee air circulation (heat dissipation).
Do not install the unit outdoors or in places without proper ventilation.
Before start-up, be sure the device reaches room temperature.
6.3 Storage
The unit location is very important when it comes to workplace safety, even if it is only to
be set up there for a short period. The room should be dry, well ventilated and vibration-
free. An even temperature and wooden supports also help. The unit should not be stored
or set up outdoors. If the unit is to be stored for an extended period, protect it from
moisture and dust.
7 Installation/ Start-up
Before starting the unit, connect up the following:
1. Take the cable from the filter under the cover.
2. Plug the unit into the mains.
Finally , insert the power plug into the socket, making sure that the mains and the unit
operate on the same voltage.
7