9
The pump fails to draw the
cleaning agent
1.Wrong nozzle used
2.The priming hose is not dipped in the
cleaning agent or it is clogged
3.Clogged hose or strainer
1.Replace the high-pressure nozzle with a
low-pressure (black) one
2.Check the volume of cleaning agent and
adjust the position of hose
3.Clean the washer with flowing water,
replace the priming hose
The engine runs smoothly
when not loaded, jerky under
load
1.Low engine speed
1. Adjust the position of speed control lever,
check the position of locking screw for
engine speed control
The engine stopped during
operation
1.The engine has run out of fuel
2.The spark plug terminal has fallen out
3. Low oil level in the engine
1.Add fuel into the tank
2.Check the spark plug terminal
3. Check the engine oil level
The engine fails to start or
starts and runs in jerky way
1.Clogged air filter
2.The engine has run out of fuel
3.Old fuel
4.The spark plug terminal is not linked with the
spark plug
5.Faulty spark plug
6.Fuel contaminated with water
7.Incorrect fuel mixing rate
1.Clean the air filter
2.Add fuel into the tank
3.Replace the fuel with fresh one or even top
up a larger amount of fresh fuel
4.Check the fittings of terminal on the spark
plug
5.Replace the spark plug with a new one
6.Drain the fuel from tank and carburettor
and add fresh fuel
7.Contact a servicing centre
Insufficient
engine
performance
1.Clogged air filter
2.Old fuel
1.Clean the air filter
2.Fill the tank with a fresh fuel
Use original parts only. That will ensure smooth operation of your device.
Warranty
The warranty conditions of our distribution organisation apply in every country. Potential failures of your
devices will be removed free of charge within the warranty period, if due to defects of material or
workmanship. To claim the warranty, please submit the sales receipt for your device at your distributor or the
closest authorised servicing workshop. For the list of approved servicing centres, see our website at:
www.
wpw
-
center
.com
The efforts made by WPW Center s.r.o. are aimed at sustainable development of technical parameters and
user-friendly parameters of its products. For this reason, the manufacturer reserves the right to alter the
design and control features without any prior notification to the end customers. The position of all control and
safety features illustrated in this manual corresponds with their actual positioning. This manual does not have
to reflect any changes in design of control levers.
Technical data
Device type
W3000HC
Engine type
Biggs-Stratton
163cm3/ 3,7kw
Maximum speed
3600 rpm
Engine model
Four-stroke OHV
Torque
10.2 Nm/ 2600 rpm
Ignition spark plug
Brisk: DR14YC
spacing 0.7-0.8 mm
Champion: RC12YC
Fuel tank capacity
3.1 l
Oil filling capacity
0.6 l / 10w40
Water pressure and flow
3000psi/ 207bar
8.7 l/ min.
Net weight
27. kg
Height
95 cm
Width
52cm
Length
57cm
Water priming function
Yes
