Wasp WWS750, Quick Reference Manual, Page: 39 / 52

LED and Beeper Indications
Quick Reference Guide 29
Table 3. Error Indicators
Programming Mode - The following indications ONLY
occur when the reader is in Programming Mode.
INDICATION DESCRIPTION LED BEEPER
Link Attempt
The reader is try-
ing to link to the
base
Slow
Flashes
N/A
Configuration
Alignment
Reader and Base
are aligning the
parameters' con-
figuration
Fast Flashes N/A
Link
The reader has
successfully
linked to the base
N/A
3 beeps of
ascending fre-
quency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending fre-
quency
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep at
highest volume.
Limited
Scanning
Label Read
Indicates that a
host connection
is not estab-
lished.
N/A
Reader 'chirps' six
times at the high-
est frequency and
current volume.
Reader
Disabled
The reader has
been disabled by
the host. The LED
blinks con-
tinuously
N/A
INDICATION DESCRIPTION LED BEEPER
Label Pro-
gramming
Mode Entry A valid program-
ming label has
been scanned. LED blinks
continu-
ously Reader sounds
four low fre-
quency beeps.
Label Pro-
gramming
Mode Rejec-
tion of Label
A label has been
rejected.
N/A
Reader sounds
three times at
lowest frequency
and current vol-
ume.