Product Reference Guide
21
Chapter 3
Configuration Using Bar Codes
This and following sections provide programming bar codes to configure your reader by chang-
ing the default settings. For details about additional methods of programming, see "
NOTE
You must first enable your reader to read bar codes in order to use this section. If you
have not done this, go to
and complete the appropriate
procedure.
Configuration Parameters
Once the reader is set up, you can change the default parameters to meet your application
starting on page 277 for initial configuration in order to set
the default values and select the interface for your application.
The following configuration parameters are divided into logical groups, making it easy to find
the desired function based on its reference group.
Interface Configuration:
• "RS-232/USB-Com Interfaces" on page 30
• "Keyboard Settings" on page 37
Parameters common to all interface applications:
•
on page 51 gives options to control the messages sent to the Host system.
•
on page 65 control various operating modes and indicators status
functioning.
Symbology-specific parameters:
•
on page 85 provides configuration of a personalized mix of 1D codes,
code families and their options.
•
on page 177 provides configuration of a personalized mix of 2D codes,
code families and their options.
NOTE
You must first enable your reader to read bar codes in order to use this section. If you
have not done this, go to
and complete the appropriate
procedure.
To program features:
1. Scan the ENTER/EXIT PROGRAMMING bar code, available at the top of each programming
page, when applicable.
2. Scan the bar code to set the desired programming feature. You may need to cover unused
bar codes on the page, and possibly the facing page, to ensure that the reader reads only
the bar code you intend to scan.
Summary of Contents for WWS650
