Wasp WWS650, Product Reference Manual

Page: 195 / 316

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 185
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code Length Control on
page 183 . Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in incre-
ments of 0001 (pad with zeroes).
See
page 245 for detailed instructions on setting this feature.
$CCSL2
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 7,827 Characters