Wasp WWS100i, Quick Start Manual, Page: 4 / 12

Chapter 1
2
QSG
2
Quick Start
1. Unpack
Open the box and remove all the pieces from their protective packaging.
2. Charging the WWS100i
You must charge the scanner for
4 hours before first using it.
To charge the scanner, plug the
provided USB cable into the
scanner and your local PC.
When the device is charging,
the LED light on the top of the scanner will blink red
.
3. Setting up the Bluetooth Adaptor
If you already have Bluetooth setup on your PC or device, please continue
to the next step.
To setup Bluetooth on your PC you will need to insert the Bluetooth
adapter into an available USB port. Windows will detect the adapter and
install the required Microsoft Bluetooth software. If Windows does not
detect the Bluetooth adapter, please remove the adapter and insert the CD
with the adapter’s Bluetooth software on it. Follow the instruction on the
CD for installing the Bluetooth software.
4. Connecting the Scanner to a Bluetooth Device
The scanner will connect to most Bluetooth devices that support HID
connection.You will need to open your Bluetooth software and search for
Bluetooth devices. The Bluetooth software can be found by clicking the
Bluetooth symbol on the start bar near the computer time. If the Bluetooth
symbol is not found, there could be a problem with the Bluetooth adapter
installation.
Once you have the Bluetooth software open you will need to scan the Set
Connection barcode (page 5). This will make the scanner ready to be detected
by the Bluetooth software.