background image

25

 -

26

 -

Example: 

To change Data Format to  <Barcode Data>, <Date>, <Time>
1. Scan [

Data Format

]

2. Scan [4], [2], [3] on page 14.
3. Scan [

Data Format

]

The default Data Format is  <Date>, <Time>, <Barcode Data> only

below are all items available for display and their codes: 

Default is comma ( 

)  You may replace it with any alphanumeric

characters from the full ASCII table in Full User’s Manual.

Example: To change Field Separator to Semicolon ( 

)

1. Scan [

Field Separator

]

2. Scan [ 

] from the full ASCII table.

3. Scan [

Field Separator

]

. R010$

FIELD SEPARATOR

(DELIMITER)

. R011$

DATA FORMAT

2

4

Date

Barcode Data

Code     Item

Code     Item

3

Time

Example: To set Date to 2017-08-01 (Year-Month-Day):
1. Scan [

Set Date

]

2. Scan [1], [7], [0], [8], [0], [1] on page 14.
3. Scan [

Set Date

]

Example: To set Time to 08:10:30 am (Hr:Min:Sec)
1. Scan [

Set Time

]

2. Scan [0], [8], [1], [0], [3], [0] on page 14.
3. Scan [

Set Time

]

. R006$

SET DATE

. R007$

SET TIME

* Full drain of battery may cause the Time and Date to stop.

   To avoid this, please, please fully charge the scanner for

   at least 1 hour before use.

MEMORY MODE

DATE & TIME SETUP

MEMORY MODE

DATA FORMAT

Summary of Contents for WRS100SBR



















Reviews: