.
© 2003 Wasp Technologies, Inc.
- 3 -
++Figure 0-8: WDT2200 Keypad layout
Numeric mode
The keyboard of the WDT2200 is initialized to normal mode after it the unit is powered on. In normal mode, the
cursor is a block sign and the keyboard is mainly used to input numeric data and the F1 through F4 function keys.
COMMAND mode
Press the [CMD] key sets the keyboard to command mode. In command mode, the cursor type stays the same and the
keyboard is mainly used to input special characters, perform hot-key
functions, and use the F5 through F8 function
keys.
ALPHA mode
Press the [ALPHA] key to toggle the keyboard between normal (numeric) mode and alpha mode. In the alpha mode,
the cursor is an underscore and the keyboard is available to input upper case letters. In alpha mode, each numeric key
contains three alphabetic characters. Press the desired key once to get the first character, twice to get the second
character and three times to get the third character. The key cycles back to the first character if you rapidly press the
key four times.
