Wasp WDI4600 Product Reference Manual Download Page 36

Page: 36 / 284

Enter/Exit Programming Mode

RS-232/USB-Com Interfaces

WDI4600

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.

$CBPNF00(CR)

Beep On Not On File = Disable

DEFAULT

$CBPNF01(CR)

Beep On Not On File = Enable

ACK NAK Options

This enables/disables the ability of the reader to support the RS-232 ACK/NAK protocol.

See

page 208

for more information.

DEFAULT

$CR2AE00(CR)

ACK/NAK Protocol = Disable ACK/NAK

$CR2AE01(CR)

ACK/NAK Protocol = Enable for label transmission

$CR2AE02(CR)

ACK/NAK Protocol = Enable for host-command

acknowledge

$CR2AE03(CR)

ACK/NAK Protocol = Enable for label transmission and

host-command acknowledge

Summary of Contents for WDI4600





























































































































































































































































































Search results

Summary of Contents for WDI4600

Reviews:

Related manuals for WDI4600

Brands by name

Popular brands

Wasp WDI4600, Product Reference Manual

Search results

Summary of Contents for WDI4600

Reviews:

Related manuals for WDI4600

Brands by name

Popular brands