Wasp WDI4600, Product Reference Manual

Page: 188 / 284

Enter/Exit Programming Mode China Sensible Code
178 WDI4600
China Sensible Code
Set Length 1
Specifies one of the barcode lengths for China Sensible Code Length Control . Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length
Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See page 217 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
barcode again.
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character