Enter/Exit Programming Mode
Product Reference Guide
127
Standard 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for
. Length 1 is the minimum label length if in
the first fixed length if in
Mode. Length includes the barcode’s
check and data characters. The length can be set from 1 to 50 characters.
provides some examples for setting Length 1. See
if you
want detailed instructions on setting this feature.
Table 10. Standard 2 of 5 Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
01 Character
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘1’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start
again at the beginning.
~
CANCEL
DEFAULT
08 = Length 1 is 8 Characters