Washtech AL, Operator'S Manual

Page: 10 / 12

AL Operating Instructions
Start up
Fit scrap trays, filter tube and basket, and shut door.
Turn wall power switch on and press machine ON/OFF Button for 1 second.
START/STOP button glows white and machine fills automatically.
Machine starts heating when wash tank is full.
START/STOP button glows orange while heating.
START/STOP button glows green when machine ready for operation.
Operation
Select Light, Medium, Heavy or Manual cycle by pressing UP or DOWN keys.
Light, Medium and Heavy cycles correspond to 40, 60 and 90 seconds cycles
accordingly.
Load rack into machine and shut door to start the cycle.
The START/STOP button glows red while machine operates.
Pressing the START/STOP button during operation will terminate the cycle.
When red light goes out, cycle is complete.
If Manual cycle is selected machine will continue washing until START/STOP
button is pressed. The following rinse will complete the cycle.
Remove rack. Close door.
NOTE: The cycle time might be longer than specified if hot water supply
temperature is below required.
Shut down every night
Select Drain cycle by pressing UP or DOWN keys.
Close door to start the drain cycle.
If door is shut, press START/STOP button to start draining.
Machine will drain for 100 seconds with a cleaning rinse in a middle of cycle.
When drain & clean are complete machine will go in to standby mode.
Remove filter basket and tube, scrap trays and rinse clean.
Replace scrap trays and filters.
40