washloo Prestige, User Manual, Page: 16 / 23

Installation Guide
Install Water Supply
1. Turn off the nearest ‘Stop Tap’ to avoid any leaks prior to installation.
2. Connect the supplied Angle Valve/Filter to the water supply.
3. Reconnect the water supply to your Washloo now with the T-Valve/Filter
installed in line.
NOTE ; Ensure all the water supply lines are clean and free from debris as this
can damage the internal system of the Washloo.
Install Washloo ‘Seal Ring’
1. Attach the ‘Seal Ring’ to the Drain Outlet of the Washloo (remove cover
from the seal ring prior to installation).
2. Position the Washloo onto the ‘Drain Outlet’ ensuring it is correctly lined
up and no misalignment (will cause flushing issues if not correctly fitted).
3. When the Washloo is correctly positioned, apply a downward pressure (on
the ceramic base of the toilet only) to allow the ‘seal ring’ to fully seal the
Washloo to the drain outlet.
Angle Valve and Filter
Braided Water Line
Seal Ring
Washloo Drain Outlet
14