11
Connection of external liquid
supply
Remove cover and cover support over the soap
box.
Bend all the way back the metal plate in
compartment 3.
Pull the knobs up and forward.
1. Loosen both knobs so that one side of the
metal fingers underneath can slide under the
top lid of the machine, within the supply box.
2. Fit the supply injector into the supply box so
that both sides are held securely in places by
the metal fingers.
Note:
If the supply injector does not fit turn it around.
You have it in backwards.
Installation
19
1336
Fig.
19
Fig.
20
Fig.
21
21
1333
20
1334
