WASAGUN ZZ001 Assembly Instructions Manual Download Page 4

Page: 4 / 9

Assembly Instructions

Step 5

Step 6

Step 7

Hx2pc

Nx1pc

Gx2pc

Ex2pc

L x1pc

Gx4pc

5:Fix fitting "N" on 11 through screw "H".

6.1:Fix the assembled 11 on the 4 through screw "G".

6.2:Fix the fitting "L" on 6 through screw "E".

7:Fix accessories 9 and 10 to both ends of 4 respectively through screw "G".

9 The middle hole is used to install the socket, which is finally on the left or

right side of the finished product. It can be determined according to your

needs.

Installation Method 1:

Installation Method 2:

There are two installation methods.

Rx1pc

Summary of Contents for ZZ001

Page 1: ...ct us by mail info wasagun com 1 2 Screwdriver Assembly Instructions Please keep for future reference End table ZZ001 Dimensions Width 22 8inch Depth 11 4inch Height 25 6inch Assembly Tool Required Read all instructions before assembly and use KEEP INSTRUCTIONS FOR FUTURE USE 1 ...

Page 3: ...orresponding to 7 and then fix it with screw H 2 Insert the other end of P into the corresponding hole of 8 and then fix it with screw H P 3 Insert part A into the corresponding hole 7 4 1 Fix both ends of 4 and 6 through fitting K with screw I 4 2 Fix the accessory O on the hole in the middle of 6 through screw H 4 3 Fix 5 to 4 through screw G Kx2pc Gx2pc Rx1pc 3 ...

Page 6: ... assembled in the same way as the previous step 11 1 The fitting M is fixed at the bottom of 1 by rotating 1 12 1 Fix drawer to 2 with screw D 12 1 Fasten drawer to 1 with screw C Since the drawer lid on the left can be flipped open this only needs to be secured on the right 2 1 Rx1pc Rx1pc 6 ...

Page 7: ...x4pc J x4pc 13 1 Fix screw F on the two holes at the rear top of 1 13 2 Fix screw C on the two holes at the top of the front of 1 13 3 Fix screw J on the front inner hole of 1 C C C J J J 14 There are two ways to open a finished product As shown above Rx1pc 7 ...