Ｓａｆｅｔｙ Ｎｏｔｅｓ ａｎｄ Ｃａｒｅ Ａｖｉｃｅ
Important – Please read these instructions fully before starting assembly
Parts of the assembly
will be easier with 2
people.
Assemble on a soft level surface to
avoid damaging the unit or your
floor.
Do not overload the drawers.
Do not use a power
drill/screwdriver for
inserting screws, as it
can cause screws to
break or strip.
Dispose of all packaging carefully
and responsibly.
Clean with mild soap on a damp
,
soft rag. Rinse and dry
thoroughly. Do not use abrasive
chemicals for cleaning.
Please check if there any loose screws
on the unit from time to time.
This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
Regular dusting with a dry cloth will
keep your units clean.
Clean marks with a damp cloth.
Do not allow spillages to stay on the
surface for long.
To remove stubborn stains, wipe
over with a damp cloth and washing
up liquid.
Do not use abrasive cleaners.
Do not clean with products
contaiing the following: Acetone,
(e.g nail varnish remover). Ammonia
(e.g.bleach). or Sodium hydroxide
(e.g. Caustic soda, drain and oven
cleaners).
In the event of accidental contact
with aggresive cleaners, rinse
thoroughly with water.
To remove stains and small
scratches use a car polish or light
cutting compound.
Use place mats to protect the
surface from moisture and heat.
1
2
General care and maintenance
Cleaning and care of high gloss surfaces
Do not allow your children to stand or
climb on or in the drawer. It could
make it top-heavy and cause the
unit to damage or tip over.
Assemble the item as close to its
final position (in the same room) as
possible.
Do not place furniture directly infront
of radiators, fires or any other
source of heat.
Check that if you have all the
components andools listed on the
front coverand pages 2.
Emove all fittings from the plastic
Obags and separate them into
their groups.
Keep children and animals away
from the work area, small parts
could choke if swallowed.
Make sure you have enough
space to layout the parts before
stating.
