Warwick Corvette Standard User Manual Download Page 14

Page: 14 / 20

Bridge

Treble

Tone Control

Mid

Tone Control

Bass

Tone Control

Push/Pull

Stacked Push/Pull

Volume/Pickup

Pan Control

Vampyre LTD.

All Vampyre LTD. basses come with an onboard 3-way active preamp.

Push/Pull Volume/Pickup Pan Control (Part #M88552 - 500K, 2 X 25K)*

Treble Tone Control (Part #M85100 - 100K)

Mid Tone Control (Part #M85100 - 100K)

Bass Tone Control Push/Pull (Part #M84100 - 100K)**

* By pulling on the volume knob, you will bypass the onboard active preamp, which effectively deactivates the tone controls.

**By pulling the treble knob the humbucker gets splitted.

Bridge

Pickup

Pan Control

Bass

Tone Control

Treble

Tone Control

Push/Pull

Volume Control

Vampyre SN

All Vampyre SN basses come with an onboard 2-way active preamp.

Push/Pull Volume Control (Part #M84500 - 500K)*

Pick-up Pan Control (Part #M85252 - 25K)

Treble Tone Control Push Pull (Part #M84100 - 100K)**

Bass Tone Control (Part #M85100 - 100K)

* By pulling on the volume knob, you will bypass the onboard active preamp, which effectively deactivates the tone controls.

** By pulling the treble knob the humbucker gets splitted.

Bridge

Pickup

Pan Control

Bass

Tone Control

Treble

Tone Control

Push/Pull

Volume Control

Katana Bolt-on

All Katana Bolt-on basses come with an onboard active preamp.

Push/Pull Volume Control (Part #M84500 - 500K)*

Pick-up Pan Control (Part #M85252 – 25K)

Treble Tone Control (Part #M85100 – 100K)

Bass Tone Control (Part #M85100 – 100K)

* By pulling on the volume knob, you will bypass the onboard active preamp, which effectively deactivates the tone controls.

Bridge

Treble

Tone Control

Mid

Tone Control

Bass

Tone Control

Stacked Push/Pull

Volume/Pickup

Pan Control

Katana Neckthrough

All Katana Neckthrough basses come with an onboard active preamp.

Push/Pull Volume/Pickup Pan Control (Part #M88552 - 500K, 2 X 25K)*

Treble Tone Control (Part #M85100 – 100K)

Mid Tone Control (Part #M85100 – 100K)

Bass Tone Control (Part #M85100 – 100K)

* By pulling on the volume knob, you will bypass the onboard active preamp, which effectively deactivates the tone controls.

Summary of Contents for Corvette Standard





















Search results

Summary of Contents for Corvette Standard

Reviews:

Related manuals for Corvette Standard

Brands by name

Popular brands

Warwick Corvette Standard, User Manual

Search results

Summary of Contents for Corvette Standard

Reviews:

Related manuals for Corvette Standard

Brands by name

Popular brands