17
Quad IV & VI
17
QUADRUMATRIX
Q 1
Q 2
Q 4
Q 3
Characteristic
Characteristic
Characteristic
Characteristic
DI OUT
Balanced output for the connection to a
mixing desk (PA or Studio).
EFF. SEND & EFF. RETURN
Sockets to
implement the effects loop. Connect the input of
the effects device to the
SEND
socket and its
output to the
RETURN
socket.
EFF MIX
control determine the degree to which
the effects within the parallel loop affect the signal.
SPEAKER OUT sockets designed to supply
speaker cabinets. XLR and Speakon connected
parallel.
1. Make sure that the device is plugged in to the
mains and that any external (effects) devices are
correctly connected and operation-ready.
2. Connect your bass to the amplifier´s
INPUT
using a shielded line cable.
3. Turn on the power using the POWER switch.
4. At the conclusion of the valve(tube) warm-up
phase turn the
MUTE
switch off
5. Use the
GAIN
control to set the minimum
level or the desired tube compression
6. Set the desired output volume with the
MASTER
control.
7. Adjust the controls to obtain the desired sound.
To get to know the fundamental sounds of the
QUAD IV/VI, it is advisable to begin by setting all
the tone controls to 12 o'clock, before using the
QUADRUMATIX
switch to adjust each of the
four fundamental sounds in turn.
POWERING UP
