WÄRTSILÄ RadaScan RESPONDERS 3 Series, User Manual

Page: 9 / 18

1.3 Installing Responders 1
9 94-0649-A
Swivel Bracket
Mounting Responders
The Responder can be used with or without a swivel
bracket, as long as it is mounted with its longest side
vertical, and its carrying-handle at the top.
To Mount the Responder
1. Hook the foot of the Responder underneath the
knob on the bottom of the mounting plate. (See
below).
2. Rotate the Responder backwards until it is held in
place by its magnet against the mounting plate.
3. (Optional) Attach safety lanyard onto the
Responder and the swivel bracket or other fixture.
The swivel bracket (Part No. 21-0328-1) should be used to point the Responder towards the
RadaScan View Vessel’s working area.
It can be mounted on either a horizontal or vertical bar:
Mounting on Horizontal Bar Mounting on Vertical Bar
Knob
Magnet
Mounting
Plate
Swivel Bracket
Swivel Bracket
Loosen the nut to swivel the bracket
in the required direction.
! Tighten the nut with a spanner to
fix the bracket’s position.