manualshive.com logo in svg

WÄRTSILÄ ELAC LAZ 5200, Operating Instructions Manual, Page: 85 / 136

Share
Download
WÄRTSILÄ ELAC LAZ 5200 Operating Instructions Manual Download Page 85

R

efer to pr

otection

 notice ISO 16016

TH 52 614 8001 EN Rev. A 09/2018

Wärtsilä ELAC Nautik GmbH 

83 / 134

ELAC LAZ 5200 –  Operating Instructions

Operation

6.5.7.2

Selection of the Unit for the Depth Display

The following settings are available:

Selecting the unit for the depth display

Designation

Description

m

Metres

ft

Feet

fm

Fathoms

Tab. 6.18: Units for the Depth Display

The default setting is "m" (metres).

Proceed as follows to select the unit for the 
depth display:

1. Open the menu 

6.5.4.

2. Select menu item 

MAIN MENU > SET-

TINGS > Depth Unit

.

3. Press the 

[ENTER]

 key.

4. Select the desired setting with the 

[CURSOR]

 keys (up or down).

5. Press the 

[ENTER]

 key to confirm the 

selection.
–

The unit for the depth display is set.

Fig. 6.50: Selecting the Unit for the Depth Display

Summary of Contents for ELAC LAZ 5200









































































































































Reviews:

No comments