reached. To remove the Wartmann
®
vacuum pump,
press the Pressure Release Button. This will clear the
vacuum between the Wartmann
®
vacuum pump and
the blender jar connector. You can now safely remove
the Wartmann
®
vacuum pump.
Now run the applicable blender programme as you
would normally do and wait until the blending has
completely stopped. There will still be a vacuum in the
blender jar and therefore the blender jar lid should not
yet be removed. Lift the vacuum release valve inside
the blender jar connector before opening the blender
jar. This is a little rubber grip on top of the blender jar
connector. Grab it with two fingers and shortly lift it
up. You will hear the air flowing back into the blender
jar. The blender lid can now be removed.
Vacuum a drinking jar
The best way to store a vacuum blended drink is
inside a vacuum drinking jar. Do this straight after
the preparation. To vacuum a drinking jar, first fill the
required drinking jar, but never fill the drinking jar
above the MAX indicator line. If the drinking jar is
filled to the top, liquid may get into the vacuum pump
and cause irreparable damage. Place the drinking jar
lid that has the vacuum valve on top of the drinking jar.
Turn until it is properly closed.
Take the vacuum pump and place it on top of the
drinking jar. The silicon seal should fall inside the circle
of the drinking jar lid. Press the vacuum pump with a
light pressure downwards, then press the Power button
to start the Wartmann
®
vacuum pump. You will hear
the motor running. Once the vacuum is reached, the
motor will automatically switch off. This may typically
take 15 seconds or more.
You may also notice that the Pressure Level Indicator
has turned green. This is an indication that the
maximum vacuum pressure has been reached.
To remove the Wartmann
®
vacuum pump, press the
Pressure Release Button. This will clear the vacuum
between the Wartmann
®
vacuum pump and the
drinking jar. You can now safely remove
the Wartmann
®
vacuum pump. Your drinking jar can
be stored away, preferably in a cool place.
Vacuum packaging is not an alternative for cooling.
To open the drinking jar the vacuum inside the drinking
jar has to be first released. There is a little rubber grip
on top of the drinking jar. Grab it with two fingers and
shortly lift it up. You will hear the air flowing back into
the drinking jar. The lid can now be removed from the
drinking jar. You can optionally screw the drinking lid
on the drinking jar, which makes it easy to drink from
the drinking jar.
Vacuum a blender jar
The Wartmann
®
vacuum pump can be used to vacuum
pack food in special re-sealable bags. These bags
have a sealing strip at the top and a special air valve
in the corner. An example of such a bag is included
in the gift box. The air valve may be marked with a
blue circle.
Choose a re-sealable vacuum bag of suitable size
and place your product in the bag. Check that there is
enough free space under the air valve so that the air
can escape. Close the bag and firmly press the seal
strip at the top. Place the bag on a flat surface with the
air valve facing upwards.
Attach the vacuum bag connector to the bottom of
the Wartmann
®
vacuum pump. The thicker side of the
vacuum bag connector fits inside the ring at the bottom
of the vacuum pump. Place the vacuum bag connector
straight on the air valve. Hold the Wartmann
®
vacuum
pump with a light pressure on top of the air valve.
Do not press so hard that air can’t escape from
under the air valve. Press the Power button to start the
Wartmann® vacuum pump. You will hear the motor
running and should see that air is flowing out of the
vacuum bag.
Once the vacuum is reached, the motor will
automatically switch off.
You may also notice that the Pressure Level Indicator
has turned green. This is an indication that the
maximum vacuum pressure has been reached.
To remove the Wartmann
®
vacuum pump, press the
Pressure Release Button. This will clear the vacuum
between the Wartmann
®
vacuum pump and the air
valve. You can now safely remove the Wartman
®
vacuum pump.
If you want to remove less air of the vacuum bag, then
the Wartmann
®
vacuum pump can be stopped earlier
by pressing the Power button.
13
12