background image

WARSANIS 1401FM USER MANUAL

 

 

 

 

WARRANTY

 

Warsanis Productions warrants its products to be free from any defects in 
workmanship for a period of one year.

 

This warranty will not be void if the user 

modifies a Warsanis product. However, broken wires, broken PC board circuit traces, 
burned areas and broken components resulting from improper procedures/ handling 
are not covered under warranty. Warsanis Productions is not responsible for dam-
ages resulting from the use of its product, from incorrect or unsafe installation, or for 
damages caused by war, fire, flood or other man made or natural calamites. 
 
Please fill in the Registration Card and fax it to Warsanis Productions in The 
Netherlands. You are then automatically entered in our product update en new 
product mailing list. 
 
 

INTRODUCTION

 

The Warsanis 1401FM is an integrated multiband audio processing system for FM 
radio that replaces all others compressors, limiters, clippers, the stereo generator 
and filters. It can be installed either at the studio site using the analog stereo outputs 
or the transmitter site using the composite outputs. It can also be used for a compos-
ite baseband microwave link. It is possible with the Warsanis 1401FM to create your 
own sound with an absolute control of peak modulation. You can vary your sound 
between unprocessed and heavily processed. With the Warsanis 1401FM you can 
give your station the punch, loudness and clarity you always wanted. The Warsanis 
1401FM does not only do a great job for CHR stations but also sounds perfectly for 
talk radio

 

and

 

AC music formats and even clasical. 

 
 
 
 
 

AGC

LEVELER

PHASE

ROTATORS

FOUR BAND

PROCESSOR

MULTIBAND

CLIPPERS

LOUDNESS

CLIPPERS

15kHz LP

PHASE COR.

Simplified Block Diagram

Phase Rotators and AGC/Leveler are user selectable

 

 

Summary of Contents for 1401FM
























Reviews: