TO INSTALL THE BATTERy:
9
EN
3. Put the chain on the drive sprocket (4), let the bolt
(5) on the housing pass through the long groove in
the chain bar, and pull the guide plate horizontally
outward to tensioner the chain.
4. Tighten the chain bar with one hand, align the nuts
in the side cover with the bolts with one hand, turn
the knob clockwise (don’t tighten it, and the guide
plate will not shake after releasing it),after fixing
the guide plate, turn the rotating base (6), make
the bending part of the fixing plate on the guide
plate buckle into the groove of the tension disc (7),
rotate the knob base again to adjust the tightness
of the chain, after adjustment, tighten the knob.
WARNING
In order for the pole chain saw to cut:
–
The mounting direction of the chain shall be
consistent with the marking on the housing.
–
The chain tension needs to be readjusted after cutting
for a period time.
–
Each time you adjust the tension of the chain, first
remove battery or separate poles (See FIG 4), loosen
the knob counterclockwise for a certain number of
turns (the knob shall not be loosened completely
to prevent the bending part of the fixing plate from
falling out of the tensioning disc), and then turn the
knob base for adjustment clockwise gently.
–
Tighten knob securely clockwise and test tension of
chain
–
During operation, the oil pot must have oil.
CONNECT :
–
This product requires assembly.
–
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
–
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
–
Don’t discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
2
3
4
5
6
7