www.warriorcustomgolf.com
8 |
P a g e
Installation of Light Brackets and Fixture
Note:
Instructions below are detailed for use with our recommended light fixture, with any other
fixture instructions may not be exact but will probably be similar. If you decide against installing
light bracket at this time, use the (4) black caps found in the hardware kit to cover the holes.
1.
Attach Light Brackets (2) using (4) 1/4” X 1 3/4” bolts and washers to the base of
either end of the table where you will find 2 holes (one above the other) with t-
nuts installed.
2.
Loosen screws a & b (photo L2) enough to insert light bracket (see photo L2)
