Page 5
For technical questions, please call 1-888-866-5797.
Item 59437
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
8.
Wear personal protective equipment.
Depending on application, use face
shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection
must be capable of stopping flying debris
generated by various operations.
The eye protection must be capable of
stopping flying debris generated by various
operations. The dust mask or respirator must
be capable of filtering out particles generated
by your operation. Prolonged exposure to
high intensity noise may cause hearing loss.
9.
Keep bystanders a safe distance away
from work area. Anyone entering the
work area must wear personal protective
equipment.
Fragments of workpiece or of a
broken accessory may fly away and cause
injury beyond immediate area of operation.
10.
Hold power tool by insulated gripping
surfaces only, when performing an
operation where the accessory may
contact hidden wiring or its own cord.
An accessory contacting a ″live″ wire may
make exposed metal parts of the power
tool ″live″ and shock the operator.
11.
Never lay the power tool down until the
accessory has come to a complete stop.
The spinning accessory may grab the surface
and pull the power tool out of your control.
12.
Do not run the power tool while carrying
it at your side. Accidental contact with the
spinning accessory could snag your clothing,
pulling the accessory into your body.
13.
Regularly clean the power tool’s air
vents. The motor’s fan will draw the
dust inside the housing and excessive
accumulation of powdered metal
may cause electrical hazards.
14.
Do not operate the power tool
near flammable materials.
Sparks could ignite these materials.
15.
Do not use accessories that require
liquid coolants. Using water or other liquid
coolants may result in electrocution or shock.
16. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
17. Avoid unintentional starting.
Prepare to begin work before
turning on the tool.
18. Do not depress the spindle lock when
starting or during operation.
19. Do not leave the tool unattended when the
Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
20.
The battery Charger gets hot
during use. The Charger’s
heat can build up to unsafe
levels and create a fire hazard
if it does not receive adequate
ventilation, due to an electrical fault, or if it is
used in a hot environment.
Do not place the Charger on a flammable
surface. Do not obstruct any vents on the
Charger.
Especially avoid placing the
charger on carpets and rugs; they are not
only flammable, but they also obstruct
vents under the charger.
Place the Charger on a stable, solid,
nonflammable surface (such as a stable
metal workbench or concrete floor) at least 1
foot away from all flammable objects, such
as drapes or walls. Keep a fire extinguisher
and a smoke detector in the area.
Frequently monitor the Charger and
Battery Pack while charging.
21. This product is not a toy.
Keep it out of reach of children.
22. People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close proximity to
heart pacemaker could cause pacemaker
interference or pacemaker failure.
23. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
