Page 2
For technical questions, please call 1-888-866-5797.
Item 57708
Specifications
Type
Carbide Grit
Piece Count
9
Saw Sizes
1-1/4
″
, 2-1/8
″
, 2-5/8
″
, 2-7/8
″
, 3-1/4
″
Other Pieces
Carbide Grit File
Backing Plate
Pilot Bit
Blow Molded Case
IMPORTANT SAFETY INFORMATION
The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
1.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during setup and use.
2.
Keep away from children.
3.
Verify drill’s chuck is in good
condition and fits securely.
4.
Do not use excessive pressure
when cutting a hole.
5.
Use as intended only;
do not modify tools.
6.
Inspect before every use; do not
use if parts are loose or damaged.
7.
Use both hands when drilling and
keep saw at 90° to workpiece.
8.
Store saws in Case in secure
location away from children.
9.
Do not exceed 1500 RPM.
10.
Read and adhere to all safety
warnings and operating instructions
of drill used with Set.
SAVE THESE INSTRUCTIONS.
