Protecting Your Adventure Lifestyle
========================================================================================
●
●
●
Warrior Products, Inc.
11100 SW Industrial Way
Tualatin, OR 97062
Phone: (888) 220-6861
Fax: (503) 692-0364
Fig. 3
POSITION HOOK IN
RECESSED NOTCHES ONLY
Fig. 4
3.
Now carefully position the platform on
the sub-frame rails. The latches should
still be slightly loose allowing them to
move slightly so they may correctly sit
on the rails. Position the platform on
the MOD rails so that the latch hooks
engage with the recessed notches in the
MOD rail cutout as shown in Figure 3.
(DO NOT CLAMP THE LACH HOOK ON A
RAISED TAB OF THE MOD RAIL
CUTOUT!!! CLAMPING ON A RAISED
TAB WILL NOT ADEQUATELY SECURE THE PLATFORM!!!)
4.
Now evenly position the platform and clamp the latches onto the MOD rail. You can adjust the tension of the
latch by un-clamping the latch and screwing the hook in or out of the latch handle. Screwing the hook in will
make the latch tighter and unscrewing the hook will make the latch looser. Adjust the hook at all four latches so
that the latch handle will close with some resistance (you do not need to overtighten the latches).
5.
Once all four latches are clamped down, make sure the platform is square and centered on the MOD rack sub-
frame. After centering the platform, tighten the sixteen 3/8” bolts attaching the Latches to the platform, but be
careful not to move the platform out of position before the hardware is tight.
6.
The final installation step is to install the secondary safety on each latch. Lynch Pins have been provided (please
note that they are not long enough to pass through both sides of the latch). You may use these Lynch Pins to
prevent accidental opening of the MOD rail latches. You may also choose a bolt and nut combination if you
prefer, or even long-shackled padlocks for increased security. (Fig. 4)
7.
Double check that all hardware has been tightened. You may now enjoy your new Warrior Products MOD rack
platform! You can position the Platform anywhere along the MOD rail, or even leave the Platform at home in
the garage while not in use. With the platform removed, the soft top can be opened or closed without removing
the sub-frame by folding it between the side rails.
If you need further assistance installing your product, please contact us by email at
at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS