background image

11. Wireless Remote Control: allow you control winch up to 50 Ft  away. 

12. Universal  Flat  Bed  Mounting  Channel:  Your  winch  could  have  been  optionally 

supplied  with  a  flat  bed  mounting  channel  that  can  be  mounted  to  most  flat 

surfaces such as trailers, step bumpers, truck beds, etc. The mounting channel 

also has holes to accept your roller fairlead. 

13. Snatch Block: If Your winch is supplied with a snatch block that can double the 

pulling power of the winch, or change the pulling direction without damaging the 

wire  rope. We  recommend  you  to  use  double  line  and  snatch  block  for  pulling 

over 70% of the rated line pull. 

SAFETY PRECAUTIONS

 

WARNING 

WARNING 

– 

Do not exceed rated capacity shown in this table. 

WARNING 

– 

Intermittent use only. Allow winch to cool between uses. 

WARNING - 

Do not use winch to lift (vertically). 

WARNING - 

Do not use winch to pull or move people in any way. 

WARNING 

– 

NEVER cut, weld, or modify any part of the winch or cable. 

WARNING - 

A minimum of five wraps of cable around the drum barrel 

necessary for pulling and holding the rated load. 

is 

WARNING - 

Keep yourself and others a safe distance to the side of the cable 

when it is under tension. 

Layer 

 

Rated line pull lbs (kgs) 

 

Total rope on the drum ft (m) 

 

13228

6000

 

22.0

6.7

 

11111

5040

 

45.9

14.0

 

9579

4345

 

75.5

23.0

 

8417

3818

 

86.9

26.5

 

 

Summary of Contents for 6000EN



















Reviews: