Table Assembly Instructions
Note:
No additional tools required for assembly, all nuts are pre-installed in the table. It is
recommended to get all bolts “Started” only. Once all bolts have been started check alignment of “top
plates”, “leg panels” & “side panels” before tightening bolts completely. No Impact or Power tools.
1.
Make sure the leveler inner nut and bolt are tight before installing leg levelers (leave top nut
loose) Attach to legs by twisting in clockwise direction until they are all the way in.( do not
overtighten) then stand both legs in upright position.
2.
Position both side panels (2) on each side of the leg panels (make sure the 5 predrilled holes
are on the top ), using (8)
5/16” x 1-3/4
”
bolts
with washers
attach side panels to leg panels
(Do not tighten yet)
3.
Attach goal boxes (2), using (4) 1/4” x
1-3/4
”
bolts and washers.
4.
Insert metal plate into precut slots in goal box.
5.
Attach ball catch (1)
using (2) 1/4” x 1-3/4
”
bolts
with washers.
6.
Install ball return runners (2)
a.
With goal boxes mounted attach “ball return runner” on to white collar
b.
Make sure runner completely covers the collar
c.
Install collars into ball catch
d.
Make sure runner completely cover ball catch collars
7.
Place table top onto cabinet and secure using (6) 5/16” x 1-3/4” bolts with washers.
8.
Attach corners blocks (4) to
side of table using (4) 1/4” x 1-3/4” b
olts with washers
(Align all side panels to legs and tighten all bolts securely.)
9.
Attach top
plate (2) using (4) 1/4” x 1-3/4” bolts.
10.
Attach score beads (2) on to top plate using (4) #10 x 1-1/2” bolts.
11.
(a) Remove nut from Rod Guards and (b) install into round hole with nut inside table
12.
Remove Nut from Inner bearing insert rod into Rod Guard Bearing drop in opening and tighten
13.
Wipe down rods with cloth or napkin. Lubricate rod outside of men with 1 or 2 drops of
silicone.
14.
Level t t o raise or lower each corner then raise TOP nut to secure.
1 man
goalie
rods use 10
"
rod guard
and are closest to goal
2 man rods use 15
"
rod guard
and are second rod from goal
5
man rods use
5"
rod guard
and are in the middle position of table
3 man rods use 10" rod guards and are furthest from goal
5 |
P a g e
ROD and Guard Locations
(view picture on cover for refrence)
